The Heidi Swapp Minc Foil Applicator makes it easy to apply foil to any art work or craft project. This tutorial will walk you through how the machine works, how to set it up and use it, plus give you tips and and tricks on how to get the best results.
What is the Heidi Swapp Minc Machine?
The Heidi Swapp Minc Machine is a simple but BRILLIANT product that allows you to apply foil to artwork, craft projects or anything else you can send through a laser printer! They come in 2 sizes, the 12 inch Minc and the 6 inch Minc. American Crafts provided me with the 12 inch, and prefer it because I can put standard 8.5×11″ paper through it without trimming it down.
The basic idea of how it works is that with the heat and pressure of the Minc machine, you can use foil sheets to adhere anywhere you have toner on your paper. This means that you cannot print your project on a regular ink jet printer, but need to use a laser printer. If you don’t have one there are a few easy and inexpensive options.
- Print your projects off at your local office store. I have used both Office Depot and Staples and both offer a service where you can email over your file and they will print it off and have it ready and waiting when you arrive. To get your local store’s email, just give them a call. When printing in black and white, which is what you need for Minc foil projects, it can be as low as $0.10 a page for printing.
- If you think you will be doing a lot of foil projects, you might want to get a laser printer of your own. They are actually really affordable and sometimes even go on sale under $50! I got this laser printer which is a bit more expensive than that, but I wanted the option to do color as well for other projects. Less expensive ones like this black and white laser printer are usually around $80 but can go on super sale for under $50 usually around the holidays.
- If you are super artsy and do hand lettering or doodling, you might just want to go with a toner pen! These let you draw free hand anything you want and the machine will apply foil to your artwork. I have seen them at Hobby Lobby, and would assume other craft stores carry them as well.
How to Set Up Your Minc Foil Applicator
The Minc foil applicator is actually one of the simplest machines to set up I have used in the craft world. When you open the box you will see a few things.
- The Minc Machine
- Instruction manual
- 1 transfer folder
- 1 small sheet of gold foil
- 3 practice tags
To set up the Minc you first need to remove the tape over the forward reverse button as shown in the photo above, and then peel back the film over the top of the Minc. After you have removed those, simply plug the machine in.
How to Use The Minc to Apply Foil to a Project
Now to start your foil project!
- Print out whatever you want to apply the foil to on a laser printer. You can print it in black and white because anywhere the toner is will be covered with foil regardless.
- Turn on your Minc machine and set the heat setting using the middle button. The guide gives you some very general guidelines, but I had the most success with setting 4 for coated paper and used setting 2 on thin uncoated copy paper (see note below.) The machine will beep at you and the indicator light will turn green when it is ready.
- Next cut a piece of foil slightly larger than your design, so that the part to be foiled is completely covered by your cut foil sheet. The directions suggest 1/4″ bigger. I think this is mostly due to the fact that it can shift a little inside the transfer folder.
- Place the paper inside the transfer folder image up. Place the foil on top of the paper, lined up to cover the design with the shiny side up, and gently close the top over the transfer folder over the project, being careful to keep the foil smooth and unwrinkled. Note: the foil may have very slight ripples in it and that is okay, it will smooth out in the machine, just avoid wrinkles and large ripples or creases.
- Now carefully feed the folder into the machine by holding up to the rollers. If you hold it up to them, you shouldn’t have to push, it will just grab the folder and start to feed it through. There is no need to push or pull the folder, just let the rollers take it through the machine and retrieve it on the other side.
- Once the folder is completely out of the rollers on the other side of the machine, gently open the folder and then again, gently, peel back the foil from your project. It should stick where the toner was printed onto the paper and release where there was no toner. Magic!
Tips and Tricks to get the BEST Results with Your Minc
I am pretty new to the Minc foil applicator but played with it quite a bit since I got it and found some tips and tricks so far that have helped me get better results I wanted to share with you.
- You will get the best results with professionally printed projects. You will notice in the pic above, I had some spots on my Utah I printed with my home laser printer that didn’t take the foil. At first I was annoyed but once I got the foil completely off I noticed that it actually gives it a very natural distressed look and kind of loved it! If you send your files over to the office store and get them printed you will get the most even application. However, after playing around I was able to get rid of almost 100% of the spots with my home printer too, so keep reading!
- If you use a home printer:
- PAPER MATTERS- If you want a solid foil application, do not use plain copy paper, it will give you a very distressed look with a “textured look” to the finish. With that said, the finish on the copy paper was actually very beautiful in it’s own right, but if you are going for a smooth foil finish there is pretty much no way to make plain paper work.
- Coated paper worked extremely well for me. The difference between the plain paper and coated paper on the same setting is night and day. I used double coated paper for laser printers I bought at Staples in my home printer for use with the Minc.
- Turn the heat up! I found the manual very ambiguous on how to choose which setting to use. Since nothing I was using was even as heavy as cardstock, I decided to start with a setting of 2, which resulted in some spotting on the coated paper and a very distressed finish on the regular copy paper. When I turned the heat up to setting 4, the coated paper came out nearly flawless, but the copy paper was more or less the same.
- Try the Toner Pen– My friend Dawn from By Dawn Nicole, tried out the toner pen and said it worked flawlessly, so that also is highly recommended for those with a talent for hand drawn art.
- Apply your foil on one project at a time. After my first attempt came out so well, I decided to do the next three small projects all at once since they all fit in the folder. I cut one solid sheet of foil to fit over them and and ran it though the machine. BAD IDEA! The foil shifted and wrinkled and the end result showed those wrinkles all throughout the designs. I tried to put the projects back through the machine one at a time and layered on more foil to see if I could get it to stick to the places the wrinkles showed through. It did not ruin the project, but it certainly did not fix it. It was more or less the same with a little less black, or distressed look, showing through. It also dulled the shininess of the foil a bit when I put it through the second time, although this wasn’t too noticeable.
- Wrinkle on purpose for texture! Now that I knew the effect the wrinkles produce, it can actually look pretty gorgeous, so if you want that distressed look, by all means, force the foil to wrinkle, or wad it up, then smooth it out, before placing it on top of your project and through the machine to get a natural distressed look.
- Use multiple colors of foil. You can cut up foil and add multiple pieces of different colors on top of your project to create a multicolor effect. I tried the a couple of times and it works really well! All I did was lay down the first smaller pieces in the places I wanted them and then added a larger piece over the top to make sure everything was covered.
- Save your extras! Any foil that is left on the sheet after you send the folder through the Minc, then peel the foil sheet off of your project, can be reused for another smaller project. I have been cutting out any decent sized pieces and keeping them in a scrap box.
- Don’t try to “Reverse Foil.” When I saw some of the negative space left on the extra foil I peeled off I loved the way the design looked and decided I wanted to try to put it back through the machine. So I printed out a solid black Utah, then cut around the gold left over Utah lettering from the project above and placed it exactly where I wanted it on the Utah. My thought process was that since the entire Utah was made of toner and the only gold foil left on the sheet was the wording I wanted to apply, it should work perfectly. It did… kind of… not really. What happened was that when it went through the machine the toner lifted off the coated paper and stuck to the transfer paper except for the circle cut around the wording. The wording did stick well, but with the ink that pulled off, the mess left on my folder and the awkward circle that was covered by the foil paper, it definitely was not the look I was going for. Note: If you do end up with toner on your folder, put another clean sheet of coated paper in the folder and run it back through the Minc. At least some of it will come off of the folder and transfer back on to the face of the extra paper.
Now that you know how to use it, go here to my friend By Dawn Nicole, to grab a free hand lettered print to make with your Minc!
Hopefully these tips give you a great starting point for your Minc. I really have loved playing with the foil applicator, and found it to be one of the easiest and most straight forward crafting machines I have used. Please let me know what you learned or what questions you still have in the comments below. It makes my day to hear from readers!
Vivian Cutler says
What is Coated Paper?
Thanks so much for this guide.
It is very helpful.
Hannah Rake says
Coated paper is a glossy paper. You can find it at staples. Hope this helped.
Nicole says
Hi! Does the foil only adhere to BLACK ink from a laser printer? I’m wanting a colored print with only gold accents. Thanks!!!
Erica says
I want to print foil on top of a color image. For example, printing my name on top of an image of some trees.
Can I create an adobe file with colorful trees in one layer, and my name in black in another layer, then print the tree layer (with my name clicked invisible), then send that same print through a laser printer, this time with the tree layer invisible and just my name being printed? So black toner name printed over inkjet trees.
Would printing toner over ink work? Would sending an inkjet print through a laser printer smear the ink?
thank you
JENNIFER CUMANA says
I got the same problem :(. How can we do if I we want a colorful image and only the text in toner?
Tracy says
Hi,
I have this machine and its a little touch and go with the result.
I like you get my designs printed at Staples, but I think where I am going wrong is the paper? As i never get a flawless result!
I currently am using NAVIGATOR 160gsm office card which I bought from staples and feels relatively smooth, but I just don’t think this is the correct paper to use.
I did get a good finish however on the tags that came in the starter pack and I wondered if anyone knows what type of cardstock is used on those tags?
Thanks xx
amanda says
Have you ever tried to foil both sides of the paper at one time? Or foil one side and flip and foil the other side? I’m making cards and want to foil my logo on the back, but wasn’t sure the best way to go about it. Or maybe I should just print the logo on a clear label and attach it? Thoughts?
Kimber says
I haven’t but I think that you should be able to do both sides without a problem! Let me know how it turns out!
virginnia winstead says
Hi, Kimber. I enjoyed your tute and even went to the other site to read her instructions, in fact I feel like a sponge that has soaked up too much water (info), as I’ve also been watching vids and reading more tutes.
I still have major questions. I am already deciding which laser printer to buy. I really like lots of different colors on my cards and don’t understand how foiling with one or more colors at once, how the individual words, and images are still never going to be “colored” the same way I’ve been doing with inkjet printer. So what can you tell me to get me to full understanding. I’d love the color printer but there’s a big price difference in mono and color, not to mention toner cartridges. I already feel like I support any and all kinds of ink people LOL. I may still go with the color printer. My Minc has been sitting here 4 days now and all I’ve done is unbox it. I need more info from someone before I put anything into the Minc. Oh, also can I copy all my “designs” on the laser and will that be the same as printing it, you know, that I will be applying toner to my papers. If not, I will have collected a large amount of stuff over 4 yrs that may be unusable with Minc. I can tell you’re thinking I’m going to foil everything, not so.
Well, looking forward to hearing some positive answers, please have a Merry Christmas until we meet again.
Kimber says
I am not sure I completely understand all of your questions, but anything that is printed with toner (any color) will adhere to the foil, so if you just want to get a black and white printer it will work the same as the color if you are just printing for foiling. If you want multiple colors you can cut out foil for each section you want in different colors and put it over the section you want that color. Hope that helps!
-Kimber
Rhonda Rossman says
I believe only the black toner foils so get a monochrome printer for sure.
Janice says
Copy all your papers you have in ordinary printer and then put them through laser printer and then you can foil them.
Susan Oakley says
I can not tell if the rollers are working. Thought I might need to insert the folder further to get the rollers to grab, but it never moved and the folder melted before I could extricate it. Does the red flashing light glow solid green on “0” and how do I tell if the rollers are working.
Kimber says
Hi Susan- It should just grab it. I would definitely call customer support on this one.
Susan says
Ah, customer support. Yes, that would be a good idea if they would only call back. But no. Not so far. Have played around further and the rollers seemed to function correctly once, but then not again the next time. Will try CS again…
Jamie says
Do you have the specifics on what type of paper you use? I’m not having much success finding double coated paper.
virginnia winstead says
I wrote before and you didn’t understand some of my questions.
This is the most important one to me. I have lots and lots of CLIPART. If I buy a laser printer, can I copy my saved CLIPART, and it will be just as if the laser printed it? You know, will the toner apply to the copies? Thanks so much for your time and knowledge.
toyin says
thanks a zil. i found the tutorial really helpful. im a beginner by the way so i wont mind more of these kind of tutorials for newbie like me. thanks again